The machine on 192.168.1.153 is my server running Ubuntu 8.04.1 LTS. I installed the tftp-hpa package: aptitude install tftpd-hpa Now the files were in place so I needed to tell inetd.conf to find the files in that folder, so edited /etc/inetd.conf. Source
Configure DD WRT The following settings needs to be a dded under: Services->Additional DNSMasq Options Code: dhcp-boot=pxelinux.0,,192.168.230.1 Configure tftp In this case we are using tftp-hpa Code: apt-get install tftpd-hpa mcedit /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/srv/tftp" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" References Source
The way to follow Eventually replace the 10.0.0.x by your addresses Go to Administration -> Diagnostics and click on run Enter ifconfig vlan1:1 10.0.0.1 netmask 255.255.255.0<br></br> and click on Save Startup Enter /usr/sbin/iptables -I POSTROUTING -t nat -o vlan1 -d 10.0.0.0/24 -j MASQUERADE<br></br> and click on Save Firewall Source
Debugging PPPoE Problems PPPoE is used mainly for handling connections via Digital Subscriber Lines (DSL). Remember: The WRT54G / WRT54GS doesn’t have an integrated DSL modem, so you need an external one. Cabling After connecting the WRT54G(S) router to the DSL modem on the port labeled Internet make sure that the Internet LED at the front panel is lit. If not, check cabling. Reboot your DSL modem after you connected the router to it....
From the time I installed my first wireless router I have been wondering if there was a way to have the wireless router manage the public IP address. I wanted the ADSL modem to function as a modem only. I have seen this setup on a few occasions when a static IP address is configure but I never had a clear understanding of the process. My wireless router has all these wonderful features and yet I would have to let my router function as an access point....
I usually only connect to my wireless network at home so I usually have few problems with network-manager on Kde or Gnome. A couple of times however I have had the experience of needing to connect to an access point on the road and network manager just would not connect. I am usually able to use command line tools to connect so its been a problem I could live with however I want wireless to just work....